| Summary: | Wireless BCM43228 does not work on Acer V3-571 | ||
|---|---|---|---|
| Product: | Fedora | Reporter: | tskoone |
| Component: | wl-kmod | Assignee: | NVieville <nicolas.vieville> |
| Status: | RESOLVED EXPIRED | ||
| Severity: | normal | CC: | jarod |
| Priority: | P5 | ||
| Version: | 17 | ||
| Hardware: | All | ||
| OS: | GNU/Linux | ||
| namespace: | |||
| Attachments: | /var/log/messages after login | ||
|
Description
tskoone
2012-12-09 07:48:37 CET
Hello, Thanks for reporting this issue. In order to try to understand what is going wrong, could you please provide (by adding an attachment) the result of the command lines below typed in a root console (using sudo may be requested) just after you log in: dmesg cat /var/log/messages lsmod rpm -qa | grep -e broadcom -e kmod-wl -e kernel lspci -vn | grep 14e4 rfkill list dmidecode -t 1 For the last one (dmidecode) remove all personal information (serial number, UUID, etc), just keep the necessary things that can identify your laptop manufacturer, model, family, etc. If the second command (lsmod) doesn't show any wl module loaded, could you please also provide the output of this command line typed in a root console: modprobe -v wl and then after this command, provide again the output of dmesg in a root console. Could you also please verify that your configuration file in /etc/modprobe.d folder and specially /etc/modprobe.d/broadcom-wl-blacklist.conf file use good "blacklist" instruction according to your hardware configuration? Thanks in advance for providing all this. But before all this, could you please try one of the solutions proposed in the /usr/share/doc/broadcom-wl-5.100.82.112/fedora.readme file (change preferred API to WEXT). For this to work, be sure that only broadcom-wl and akmod-wl are installed in their last version (rpm -qa | grep -e broadcom -e kmod-wl should help to achieve that). Once the installation performed, a new kmod-wl package should be present, and you should keep it installed. Cordially, -- NVieville lsmod: Module Size Used by nls_utf8 12558 1 fuse 78033 3 lockd 93477 0 sunrpc 255587 1 lockd vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 bnep 19585 2 bluetooth 317652 7 bnep vboxdrv 267583 3 vboxnetadp,vboxnetflt,vboxpci ip6t_REJECT 12940 2 nf_conntrack_ipv4 14970 2 nf_conntrack_ipv6 14531 3 nf_defrag_ipv4 12674 1 nf_conntrack_ipv4 nf_defrag_ipv6 18178 1 nf_conntrack_ipv6 xt_state 12579 5 nf_conntrack 84046 3 xt_state,nf_conntrack_ipv4,nf_conntrack_ipv6 ip6table_filter 12816 1 ip6_tables 26943 1 ip6table_filter arc4 12616 2 rt2800usb 26758 0 rt2x00usb 19758 1 rt2800usb rt2800lib 60984 1 rt2800usb rt2x00lib 66508 3 rt2x00usb,rt2800lib,rt2800usb mac80211 554733 3 rt2x00lib,rt2x00usb,rt2800lib uvcvideo 80923 0 videobuf2_vmalloc 12968 1 uvcvideo videobuf2_memops 13391 1 videobuf2_vmalloc videobuf2_core 34280 1 uvcvideo videodev 119977 2 uvcvideo,videobuf2_core media 20445 2 uvcvideo,videodev crc_ccitt 12614 1 rt2800lib snd_hda_codec_hdmi 36274 1 snd_hda_codec_realtek 78084 1 lib80211_crypt_tkip 17663 0 acer_wmi 32548 0 coretemp 13394 0 kvm_intel 132763 0 wl 2600697 0 snd_hda_intel 37619 4 sparse_keymap 13527 1 acer_wmi iTCO_wdt 13481 0 iTCO_vendor_support 13420 1 iTCO_wdt snd_hda_codec 126890 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel i2c_i801 18135 0 snd_hwdep 17651 1 snd_hda_codec tg3 148916 0 snd_seq 64878 0 cfg80211 197072 3 wl,mac80211,rt2x00lib snd_seq_device 14137 1 snd_seq snd_pcm 97547 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel rfkill 21385 6 cfg80211,acer_wmi,bluetooth snd_page_alloc 18102 2 snd_pcm,snd_hda_intel snd_timer 28691 2 snd_pcm,snd_seq snd 79380 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device mei 75377 0 kvm 419459 1 kvm_intel lpc_ich 17062 0 lib80211 13969 2 wl,lib80211_crypt_tkip soundcore 14492 1 snd mfd_core 13146 1 lpc_ich microcode 23447 0 binfmt_misc 17464 1 uinput 17674 0 xts 12871 2 gf128mul 14333 1 xts dm_crypt 22893 2 crc32c_intel 12902 0 ghash_clmulni_intel 13221 0 sdhci_pci 18658 0 sdhci 37836 1 sdhci_pci mmc_core 102361 1 sdhci wmi 18698 1 acer_wmi i915 534524 3 video 18937 2 i915,acer_wmi i2c_algo_bit 13258 1 i915 drm_kms_helper 44758 1 i915 drm 255061 4 i915,drm_kms_helper i2c_core 38354 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev rpm -qa | grep -e broadcom -e kmod-wl -e kernel: kernel-devel-3.6.8-2.fc17.x86_64 abrt-addon-kerneloops-2.0.18-1.fc17.x86_64 broadcom-wl-5.100.82.112-3.fc17.noarch kmod-wl-3.6.7-4.fc17.x86_64-5.100.82.112-7.fc17.x86_64 kernel-3.6.9-2.fc17.x86_64 kernel-headers-3.6.9-2.fc17.x86_64 kernel-3.6.7-4.fc17.x86_64 kmod-wl-3.6.8-2.fc17.x86_64-5.100.82.112-7.fc17.1.x86_64 kernel-devel-3.6.7-4.fc17.x86_64 kernel-3.6.8-2.fc17.x86_64 kernel-devel-3.6.9-2.fc17.x86_64 kmod-wl-3.6.9-2.fc17.x86_64-5.100.82.112-7.fc17.2.x86_64 libreport-plugin-kerneloops-2.0.18-1.fc17.x86_64 akmod-wl-5.100.82.112-7.fc17.x86_64 uname -a: Linux AspireV3 3.6.9-2.fc17.x86_64 #1 SMP Tue Dec 4 13:26:04 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lspci -vn | grep 14e4: 02:00.0 0200: 14e4:16b5 (rev 10) 02:00.1 0805: 14e4:16bc (rev 10) (prog-if 01) 02:00.2 0880: 14e4:16be (rev 10) 02:00.3 0880: 14e4:16bf (rev 10) 03:00.0 0280: 14e4:4359 rfkill list 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 4: phy2: Wireless LAN Soft blocked: no Hard blocked: no dmidecode -t 1 # dmidecode 2.11 SMBIOS 2.7 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Acer Product Name: Aspire V3-571 Version: V1.07 Serial Number: ... UUID: ... Wake-up Type: Power Switch SKU Number: Type1Sku0 Family: Type1Family dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.9-2.fc17.x86_64 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Dec 4 13:26:04 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.6.9-2.fc17.x86_64 root=/dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True rd.luks.uuid=luks-4ef0311f-7bfb-4b4c-a478-38a5eb627ec4 KEYTABLE=fi rd.luks.uuid=luks-b62ea707-eead-43a4-a49a-d38f79369910 LANG=en_US.UTF-8 rhgb quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a6abefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cf5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Acer Aspire V3-571/VA50_HC_HR, BIOS V1.07 05/11/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x1cf600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 1CF600000 mask FFFE00000 uncachable [ 0.000000] 8 base 1CF800000 mask FFF800000 uncachable [ 0.000000] 9 base 1D0000000 mask FF0000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xa6ffffff] [ 0.000000] [mem 0x00000000-0xa6ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xa6ffffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1cf5fffff] [ 0.000000] [mem 0x100000000-0x1cf5fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x1cf5fffff @ [mem 0xa6aba000-0xa6abefff] [ 0.000000] RAMDISK: [mem 0x35cde000-0x36e66fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000a6ffe210 0008C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 00000000a6ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 00000000a6fec000 0B783 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 00000000a6fbb000 00040 [ 0.000000] ACPI: UEFI 00000000a6ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 00000000a6ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 00000000a6ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 00000000a6ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 00000000a6ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 00000000a6feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 00000000a6fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 00000000a6fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 00000000a6fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fe0000 00926 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cf5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1cf5fffff] [ 0.000000] NODE_DATA [mem 0x1cf5ec000-0x1cf5fffff] [ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff8801c8e00000-ffff8801cebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x1cf5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xa6abefff] [ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff] [ 0.000000] node 0: [mem 0x100000000-0x1cf5fffff] [ 0.000000] On node 0 totalpages: 1530957 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 661248 pages, LIFO batch:31 [ 0.000000] Normal zone: 13272 pages used for memmap [ 0.000000] Normal zone: 836136 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000a6abf000 - 00000000a6ebf000 [ 0.000000] PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000 [ 0.000000] PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000 [ 0.000000] PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000 [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000 [ 0.000000] PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000 [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801cf200000 s84288 r8192 d22208 u262144 [ 0.000000] pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1501295 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.9-2.fc17.x86_64 root=/dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True rd.luks.uuid=luks-4ef0311f-7bfb-4b4c-a478-38a5eb627ec4 KEYTABLE=fi rd.luks.uuid=luks-b62ea707-eead-43a4-a49a-d38f79369910 LANG=en_US.UTF-8 rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 5926364k/7591936k available (6315k kernel code, 1468108k absent, 197464k reserved, 6888k data, 1032k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:8448 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 24641536 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2095.441 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.88 BogoMIPS (lpj=2095441) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000035] Security Framework initialized [ 0.000041] SELinux: Initializing. [ 0.000050] SELinux: Starting in permissive mode [ 0.000801] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002764] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003579] Mount-cache hash table entries: 256 [ 0.003770] Initializing cgroup subsys cpuacct [ 0.003773] Initializing cgroup subsys memory [ 0.003783] Initializing cgroup subsys devices [ 0.003785] Initializing cgroup subsys freezer [ 0.003786] Initializing cgroup subsys net_cls [ 0.003787] Initializing cgroup subsys blkio [ 0.003789] Initializing cgroup subsys perf_event [ 0.003816] CPU: Physical Processor ID: 0 [ 0.003817] CPU: Processor Core ID: 0 [ 0.003822] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003822] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003824] mce: CPU supports 7 MCE banks [ 0.003836] CPU0: Thermal monitoring enabled (TM1) [ 0.003842] process: using mwait in idle threads [ 0.003846] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003846] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003846] tlb_flushall_shift is 0x5 [ 0.005450] ACPI: Core revision 20120711 [ 0.029272] ftrace: allocating 23453 entries in 92 pages [ 0.042780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052771] smpboot: CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07 [ 0.154134] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.154140] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.154142] ... version: 3 [ 0.154143] ... bit width: 48 [ 0.154144] ... generic registers: 4 [ 0.154145] ... value mask: 0000ffffffffffff [ 0.154146] ... max period: 000000007fffffff [ 0.154147] ... fixed-purpose events: 3 [ 0.154148] ... event mask: 000000070000000f [ 0.154736] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.154845] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.194658] Brought up 4 CPUs [ 0.194662] smpboot: Total of 4 processors activated (16763.52 BogoMIPS) [ 0.198317] devtmpfs: initialized [ 0.198529] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes) [ 0.199265] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.199294] RTC time: 14:23:10, date: 12/15/12 [ 0.199338] NET: Registered protocol family 16 [ 0.199505] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.199507] ACPI: bus type pci registered [ 0.199582] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.199584] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.227438] PCI: Using configuration type 1 for base access [ 0.228246] bio: create slab <bio-0> at 0 [ 0.228315] ACPI: Added _OSI(Module Device) [ 0.228319] ACPI: Added _OSI(Processor Device) [ 0.228320] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.228322] ACPI: Added _OSI(Processor Aggregator Device) [ 0.229814] ACPI: EC: Look up EC in DSDT [ 0.231330] ACPI: Executed 1 blocks of module-level executable AML code [ 0.237148] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.237573] ACPI: SSDT 00000000a6e18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.237959] ACPI: Dynamic OEM Table Load: [ 0.237962] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.240304] ACPI: SSDT 00000000a6e19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.240718] ACPI: Dynamic OEM Table Load: [ 0.240720] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.243161] ACPI: SSDT 00000000a6e17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.243537] ACPI: Dynamic OEM Table Load: [ 0.243539] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.246706] ACPI: Interpreter enabled [ 0.246709] ACPI: (supports S0 S3 S4 S5) [ 0.246728] ACPI: Using IOAPIC for interrupt routing [ 0.369890] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.370062] ACPI: No dock devices found. [ 0.370065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.370391] \_SB_.PCI0:_OSC invalid UUID [ 0.370393] _OSC request data:1 8 1f [ 0.370397] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.370932] PCI host bridge to bus 0000:00 [ 0.370936] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff] [ 0.370938] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.370940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.370942] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.370944] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.370946] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.370955] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.370994] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.371006] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.371012] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.371017] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f] [ 0.371071] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.371095] pci 0000:00:14.0: reg 10: [mem 0xc0600000-0xc060ffff 64bit] [ 0.371170] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.371196] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.371220] pci 0000:00:16.0: reg 10: [mem 0xc0614000-0xc061400f 64bit] [ 0.371300] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.371337] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.371613] pci 0000:00:1a.0: reg 10: [mem 0xc0619000-0xc06193ff] [ 0.373167] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.373199] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.373216] pci 0000:00:1b.0: reg 10: [mem 0xc0610000-0xc0613fff 64bit] [ 0.373289] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.373318] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.373450] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.373489] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.373620] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.373667] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.373935] pci 0000:00:1d.0: reg 10: [mem 0xc0618000-0xc06183ff] [ 0.375490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.375519] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.375650] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.375671] pci 0000:00:1f.2: reg 10: [io 0x2088-0x208f] [ 0.375680] pci 0000:00:1f.2: reg 14: [io 0x2094-0x2097] [ 0.375688] pci 0000:00:1f.2: reg 18: [io 0x2080-0x2087] [ 0.375697] pci 0000:00:1f.2: reg 1c: [io 0x2090-0x2093] [ 0.375706] pci 0000:00:1f.2: reg 20: [io 0x2060-0x207f] [ 0.375715] pci 0000:00:1f.2: reg 24: [mem 0xc0617000-0xc06177ff] [ 0.375764] pci 0000:00:1f.2: PME# supported from D3hot [ 0.375787] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.375804] pci 0000:00:1f.3: reg 10: [mem 0xc0615000-0xc06150ff 64bit] [ 0.375826] pci 0000:00:1f.3: reg 20: [io 0x2040-0x205f] [ 0.375927] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe] [ 0.375996] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.376033] pci 0000:02:00.0: reg 10: [mem 0xc0430000-0xc043ffff 64bit pref] [ 0.376063] pci 0000:02:00.0: reg 18: [mem 0xc0440000-0xc044ffff 64bit pref] [ 0.376116] pci 0000:02:00.0: reg 30: [mem 0xfffff800-0xffffffff pref] [ 0.376221] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.376304] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.376341] pci 0000:02:00.1: reg 10: [mem 0xc0400000-0xc040ffff 64bit pref] [ 0.376522] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.376587] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.376624] pci 0000:02:00.2: reg 10: [mem 0xc0410000-0xc041ffff 64bit pref] [ 0.376806] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.376869] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.376906] pci 0000:02:00.3: reg 10: [mem 0xc0420000-0xc042ffff 64bit pref] [ 0.377089] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.378864] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.378894] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.378965] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-fe] [ 0.379024] pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000 [ 0.379054] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc0503fff 64bit] [ 0.379208] pci 0000:03:00.0: supports D1 D2 [ 0.379209] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.380798] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.380813] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.380852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.380990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.381021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.381122] \_SB_.PCI0:_OSC invalid UUID [ 0.381123] _OSC request data:1 1f 1f [ 0.381126] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.381128] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.383945] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.383990] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.384032] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.384075] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.384117] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.384159] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.384201] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.384243] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.384327] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.384332] vgaarb: loaded [ 0.384333] vgaarb: bridge control possible 0000:00:02.0 [ 0.384395] SCSI subsystem initialized [ 0.384397] ACPI: bus type scsi registered [ 0.384436] libata version 3.00 loaded. [ 0.384456] ACPI: bus type usb registered [ 0.384471] usbcore: registered new interface driver usbfs [ 0.384484] usbcore: registered new interface driver hub [ 0.384503] usbcore: registered new device driver usb [ 0.384552] PCI: Using ACPI for IRQ routing [ 0.391386] PCI: pci_cache_line_size set to 64 bytes [ 0.391555] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.391557] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff] [ 0.391559] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff] [ 0.391560] e820: reserve RAM buffer [mem 0x1cf600000-0x1cfffffff] [ 0.391644] NetLabel: Initializing [ 0.391646] NetLabel: domain hash size = 128 [ 0.391646] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.391657] NetLabel: unlabeled traffic allowed by default [ 0.391715] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.391721] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.393735] Switching to clocksource hpet [ 0.399720] pnp: PnP ACPI init [ 0.399737] ACPI: bus type pnp registered [ 0.400048] pnp 00:00: [bus 00-fe] [ 0.400051] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.400053] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.400055] pnp 00:00: [io 0x0d00-0xffff window] [ 0.400057] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.400059] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.400061] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.400063] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.400065] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.400066] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.400068] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.400072] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.400073] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.400075] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.400077] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.400079] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.400080] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.400082] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.400084] pnp 00:00: [mem 0xafa00000-0xfeafffff window] [ 0.400086] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.400147] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.400166] pnp 00:01: [io 0x0060] [ 0.400167] pnp 00:01: [io 0x0064] [ 0.400178] pnp 00:01: [irq 1] [ 0.400195] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.400231] pnp 00:02: [irq 12] [ 0.400250] pnp 00:02: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.400298] pnp 00:03: [io 0x0000-0x001f] [ 0.400300] pnp 00:03: [io 0x0081-0x0091] [ 0.400302] pnp 00:03: [io 0x0093-0x009f] [ 0.400303] pnp 00:03: [io 0x00c0-0x00df] [ 0.400305] pnp 00:03: [dma 4] [ 0.400323] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.400330] pnp 00:04: [mem 0xff010000-0xffffffff] [ 0.400346] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) [ 0.400413] pnp 00:05: [mem 0xfed00000-0xfed003ff] [ 0.400432] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.400440] pnp 00:06: [io 0x00f0] [ 0.400445] pnp 00:06: [irq 13] [ 0.400462] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.400472] pnp 00:07: [io 0x002e-0x002f] [ 0.400474] pnp 00:07: [io 0x004e-0x004f] [ 0.400475] pnp 00:07: [io 0x0061] [ 0.400477] pnp 00:07: [io 0x0063] [ 0.400478] pnp 00:07: [io 0x0065] [ 0.400480] pnp 00:07: [io 0x0067] [ 0.400481] pnp 00:07: [io 0x0068] [ 0.400483] pnp 00:07: [io 0x006c] [ 0.400484] pnp 00:07: [io 0x0070] [ 0.400486] pnp 00:07: [io 0x0080] [ 0.400487] pnp 00:07: [io 0x0092] [ 0.400489] pnp 00:07: [io 0x00b2-0x00b3] [ 0.400491] pnp 00:07: [io 0x0680-0x069f] [ 0.400492] pnp 00:07: [io 0xfd60-0xfd63] [ 0.400494] pnp 00:07: [io 0x1000-0x100f] [ 0.400495] pnp 00:07: [io 0xffff] [ 0.400497] pnp 00:07: [io 0xffff] [ 0.400498] pnp 00:07: [io 0x0400-0x0453] [ 0.400500] pnp 00:07: [io 0x0458-0x047f] [ 0.400502] pnp 00:07: [io 0x0500-0x057f] [ 0.400505] pnp 00:07: [io 0x164e-0x164f] [ 0.400544] system 00:07: [io 0x0680-0x069f] has been reserved [ 0.400546] system 00:07: [io 0xfd60-0xfd63] has been reserved [ 0.400548] system 00:07: [io 0x1000-0x100f] has been reserved [ 0.400550] system 00:07: [io 0xffff] has been reserved [ 0.400552] system 00:07: [io 0xffff] has been reserved [ 0.400554] system 00:07: [io 0x0400-0x0453] has been reserved [ 0.400556] system 00:07: [io 0x0458-0x047f] has been reserved [ 0.400558] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.400560] system 00:07: [io 0x164e-0x164f] has been reserved [ 0.400563] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.400570] pnp 00:08: [io 0x0070-0x0077] [ 0.400576] pnp 00:08: [irq 8] [ 0.400593] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.400616] pnp 00:09: [io 0x0454-0x0457] [ 0.400644] system 00:09: [io 0x0454-0x0457] has been reserved [ 0.400646] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.459875] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.459877] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.459878] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.459880] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.459882] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.459883] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.459885] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.459886] pnp 00:0a: [mem 0xff000000-0xff000fff] [ 0.459888] pnp 00:0a: [mem 0xff010000-0xffffffff] [ 0.459890] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.459891] pnp 00:0a: [mem 0xafa00000-0xafa00fff] [ 0.459927] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.459929] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.459931] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.459933] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.459935] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459937] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.459939] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.459941] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved [ 0.459943] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved [ 0.459945] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.459947] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.459950] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.460149] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 0.460151] pnp 00:0b: [mem 0x40000000-0x401fffff] [ 0.460197] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved [ 0.460200] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved [ 0.460202] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.460219] pnp: PnP ACPI: found 12 devices [ 0.460220] ACPI: ACPI bus type pnp unregistered [ 0.466688] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref] [ 0.466722] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff] [ 0.466726] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0450000-0xc04507ff pref] [ 0.466728] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.466736] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafbfffff] [ 0.466741] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.466751] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.466757] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.466793] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.466795] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.466797] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.466799] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.466801] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff] [ 0.466803] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.466805] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.466841] NET: Registered protocol family 2 [ 0.467608] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.468969] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.469110] TCP: Hash tables configured (established 524288 bind 65536) [ 0.469131] TCP: reno registered [ 0.469146] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.469182] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.469280] NET: Registered protocol family 1 [ 0.469293] pci 0000:00:02.0: Boot video device [ 0.492787] PCI: CLS 64 bytes, default 64 [ 0.492836] Unpacking initramfs... [ 0.850341] Freeing initrd memory: 17956k freed [ 0.852878] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.852883] software IO TLB [mem 0xa2aba000-0xa6ab9fff] (64MB) mapped at [ffff8800a2aba000-ffff8800a6ab9fff] [ 0.852957] Simple Boot Flag at 0x44 set to 0x1 [ 0.853600] audit: initializing netlink socket (disabled) [ 0.853611] type=2000 audit(1355581389.725:1): initialized [ 0.873715] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.875252] VFS: Disk quotas dquot_6.5.2 [ 0.875291] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.875669] msgmni has been set to 11610 [ 0.875726] SELinux: Registering netfilter hooks [ 0.876260] alg: No test for stdrng (krng) [ 0.876269] NET: Registered protocol family 38 [ 0.876303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.876328] io scheduler noop registered [ 0.876331] io scheduler deadline registered [ 0.876357] io scheduler cfq registered (default) [ 0.876593] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.876609] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.876610] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.876894] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.876895] vesafb: scrolling: redraw [ 0.876897] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.877396] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011600000, using 4160k, total 4160k [ 0.877473] Console: switching to colour frame buffer device 170x48 [ 0.958856] fb0: VESA VGA frame buffer device [ 0.958865] intel_idle: MWAIT substates: 0x21120 [ 0.958867] intel_idle: v0.4 model 0x2A [ 0.958868] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.958966] ACPI: AC Adapter [ACAD] (off-line) [ 0.959053] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 0.959056] ACPI: Power Button [PWRB] [ 0.959089] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 0.959107] ACPI: Lid Switch [LID0] [ 0.959135] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2 [ 0.959138] ACPI: Sleep Button [SLPB] [ 0.959169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.959172] ACPI: Power Button [PWRF] [ 0.959348] ACPI: Requesting acpi_cpufreq [ 1.081630] GHES: HEST is not enabled! [ 1.081720] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.380436] ACPI: Battery Slot [BAT1] (battery present) [ 1.380594] Non-volatile memory driver v1.3 [ 1.380596] Linux agpgart interface v0.103 [ 1.381272] loop: module loaded [ 1.381331] ahci 0000:00:1f.2: version 3.0 [ 1.381393] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.381426] ahci: SSS flag set, parallel bus scan disabled [ 1.392348] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.392356] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.392366] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.394732] scsi0 : ahci [ 1.394813] scsi1 : ahci [ 1.394870] scsi2 : ahci [ 1.394926] scsi3 : ahci [ 1.394978] scsi4 : ahci [ 1.395033] scsi5 : ahci [ 1.395065] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 40 [ 1.395067] ata2: DUMMY [ 1.395070] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 40 [ 1.395071] ata4: DUMMY [ 1.395072] ata5: DUMMY [ 1.395073] ata6: DUMMY [ 1.395140] libphy: Fixed MDIO Bus: probed [ 1.395193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.395222] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.395226] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.395264] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.399176] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.399184] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.399198] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc0619000 [ 1.404309] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.404369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.404374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404379] usb usb1: Product: EHCI Host Controller [ 1.404384] usb usb1: Manufacturer: Linux 3.6.9-2.fc17.x86_64 ehci_hcd [ 1.404396] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.404505] hub 1-0:1.0: USB hub found [ 1.404509] hub 1-0:1.0: 2 ports detected [ 1.404571] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.404575] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.404615] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.408502] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.408510] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.408525] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0618000 [ 1.414295] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.414337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.414342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414347] usb usb2: Product: EHCI Host Controller [ 1.414351] usb usb2: Manufacturer: Linux 3.6.9-2.fc17.x86_64 ehci_hcd [ 1.414356] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.414465] hub 2-0:1.0: USB hub found [ 1.414468] hub 2-0:1.0: 2 ports detected [ 1.414515] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.414523] uhci_hcd: USB Universal Host Controller Interface driver [ 1.414565] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.414568] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.414609] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.414813] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.414826] xhci_hcd 0000:00:14.0: irq 21, io mem 0xc0600000 [ 1.414877] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 1.414922] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.414924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414925] usb usb3: Product: xHCI Host Controller [ 1.414927] usb usb3: Manufacturer: Linux 3.6.9-2.fc17.x86_64 xhci_hcd [ 1.414929] usb usb3: SerialNumber: 0000:00:14.0 [ 1.415002] xHCI xhci_add_endpoint called for root hub [ 1.415003] xHCI xhci_check_bandwidth called for root hub [ 1.415022] hub 3-0:1.0: USB hub found [ 1.415028] hub 3-0:1.0: 4 ports detected [ 1.415076] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.415119] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.415139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.415141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.415143] usb usb4: Product: xHCI Host Controller [ 1.415145] usb usb4: Manufacturer: Linux 3.6.9-2.fc17.x86_64 xhci_hcd [ 1.415146] usb usb4: SerialNumber: 0000:00:14.0 [ 1.415214] xHCI xhci_add_endpoint called for root hub [ 1.415215] xHCI xhci_check_bandwidth called for root hub [ 1.415234] hub 4-0:1.0: USB hub found [ 1.415241] hub 4-0:1.0: 4 ports detected [ 1.423338] usbcore: registered new interface driver usbserial [ 1.423357] usbcore: registered new interface driver usbserial_generic [ 1.423372] USB Serial support registered for generic [ 1.423374] usbserial: USB Serial Driver core [ 1.423401] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.441505] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.441510] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.441590] mousedev: PS/2 mouse device common for all mice [ 1.441886] rtc_cmos 00:08: RTC can wake from S4 [ 1.442014] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.442044] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.442108] device-mapper: uevent: version 1.0.3 [ 1.442169] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 1.442299] cpuidle: using governor ladder [ 1.442388] cpuidle: using governor menu [ 1.442503] EFI Variables Facility v0.08 2004-May-17 [ 1.442588] usbcore: registered new interface driver usbhid [ 1.442590] usbhid: USB HID core driver [ 1.442609] drop_monitor: Initializing network drop monitor service [ 1.442685] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.442714] TCP: cubic registered [ 1.442716] Initializing XFRM netlink socket [ 1.442815] NET: Registered protocol family 10 [ 1.442969] mip6: Mobile IPv6 [ 1.442971] NET: Registered protocol family 17 [ 1.443217] PM: Hibernation image not present or could not be loaded. [ 1.443239] registered taskstats version 1 [ 1.443884] Magic number: 8:471:384 [ 1.443889] usb usb2: hash matches [ 1.443963] rtc_cmos 00:08: setting system clock to 2012-12-15 14:23:11 UTC (1355581391) [ 1.455206] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.700008] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.702939] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA60A, max UDMA/133 [ 1.702948] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.704950] ata1.00: configured for UDMA/133 [ 1.705389] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5 [ 1.705778] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.705788] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.705880] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.705969] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.705975] sd 0:0:0:0: [sda] Write Protect is off [ 1.705981] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.706036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.783273] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.785148] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.820601] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.820610] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.821214] hub 1-1:1.0: USB hub found [ 1.821455] hub 1-1:1.0: 6 ports detected [ 1.853759] tsc: Refined TSC clocksource calibration: 2095.240 MHz [ 1.853771] Switching to clocksource tsc [ 1.924633] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.010534] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.023620] ata3.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.01, max UDMA/100 [ 2.039264] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.039275] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.039705] ata3.00: configured for UDMA/100 [ 2.039931] hub 2-1:1.0: USB hub found [ 2.040116] hub 2-1:1.0: 8 ports detected [ 2.044035] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVRTD11RS 1.01 PQ: 0 ANSI: 5 [ 2.046905] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.046911] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.047199] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.047416] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.051745] Freeing unused kernel memory: 1032k freed [ 2.052047] Write protecting the kernel read-only data: 12288k [ 2.065264] Freeing unused kernel memory: 1868k freed [ 2.075827] Freeing unused kernel memory: 1420k freed [ 2.114458] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd [ 2.171963] dracut: dracut-018-105.git20120927.fc17 [ 2.230245] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f01) [ 2.249362] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x18, 0x0b. [ 2.266841] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c18 [ 2.266851] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.266856] usb 1-1.3: Product: HD Webcam [ 2.266861] usb 1-1.3: Manufacturer: NC.21411.00221516DE7LM0007 [ 2.267601] dracut: rd.lvm=0: removing LVM activation [ 2.286007] udevd[133]: starting version 182 [ 2.335198] [drm] Initialized drm 1.1.0 20060810 [ 2.340189] pci 0000:00:00.0: Intel Sandybridge Chipset [ 2.340299] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.341427] pci 0000:00:00.0: detected 131072K stolen memory [ 2.341476] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 2.341478] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 2.047638] ACPI: Invalid Power Resource to register! [ 2.341497] Console: switching to colour dummy device 80x25 [ 2.345833] i915 0000:00:02.0: setting latency timer to 64 [ 2.360813] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 2.382139] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.382151] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.382152] [drm] Driver supports precise vblank timestamp query. [ 2.382185] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.441749] [drm] failed to retrieve link info, disabling eDP [ 2.874499] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.931875] fbcon: inteldrmfb (fb0) is primary device [ 3.172531] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f01) [ 3.177802] Console: switching to colour frame buffer device 170x48 [ 3.184741] fb0: inteldrmfb frame buffer device [ 3.184743] drm: registered panic notifier [ 3.194153] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x18, 0x0b. [ 3.303724] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 3.486448] acpi device:3e: registered as cooling_device4 [ 3.486865] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.486977] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 3.487138] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.495490] dracut: Starting plymouth daemon [ 3.653812] dracut: rd.dm=0: removing DM RAID activation [ 3.674597] dracut: rd.md=0: removing MD RAID activation [ 3.754619] wmi: Mapper loaded [ 3.846506] sdhci: Secure Digital Host Controller Interface driver [ 3.846509] sdhci: Copyright(c) Pierre Ossman [ 3.846750] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 3.846800] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems. [ 3.846979] Registered led device: mmc0:: [ 3.877774] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 4.576142] dracut: luksOpen /dev/sda7 luks-b62ea707-eead-43a4-a49a-d38f79369910 none [ 12.435764] dracut: luksOpen /dev/sda6 luks-4ef0311f-7bfb-4b4c-a478-38a5eb627ec4 none [ 15.048506] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 15.144921] dracut: Checking ext4: /dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 [ 15.145353] dracut: issuing e2fsck -a /dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 [ 15.216383] dracut: _Fedora-17-x86_6: clean, 243624/11542528 files, 9073505/46146048 blocks [ 15.217495] dracut: Remounting /dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 with -o ro [ 15.303266] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 15.343536] dracut: Mounted root filesystem /dev/mapper/luks-b62ea707-eead-43a4-a49a-d38f79369910 [ 15.609862] dracut: Switching root [ 16.694394] SELinux: Disabled at runtime. [ 16.694442] SELinux: Unregistering netfilter hooks [ 16.723536] type=1404 audit(1355581406.801:2): selinux=0 auid=4294967295 ses=4294967295 [ 16.759969] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 16.845467] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora) [ 16.880883] systemd[1]: Set hostname to <AspireV3>. [ 19.790505] systemd-journald[464]: Fixed max_use=290.4M max_size=36.3M min_size=64.0K keep_free=145.2M [ 19.790763] systemd-journald[464]: Vacuuming... [ 19.837927] udevd[463]: starting version 182 [ 20.571192] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 24.041074] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 24.513447] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 24.513454] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.718776] tg3.c:v3.124 (March 21, 2012) [ 24.733916] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:07:20:69 [ 24.733919] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 24.733922] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 24.733924] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 24.741912] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 24.741923] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 24.742804] microcode: CPU1 updated to revision 0x28, date = 2012-04-24 [ 24.742811] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 24.743665] microcode: CPU2 updated to revision 0x28, date = 2012-04-24 [ 24.743678] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 24.744423] microcode: CPU3 updated to revision 0x28, date = 2012-04-24 [ 24.744427] perf_event_intel: PEBS enabled due to microcode update [ 24.744472] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 24.854196] lib80211: common routines for IEEE802.11 drivers [ 24.854199] lib80211_crypt: registered algorithm 'NULL' [ 24.892154] mei 0000:00:16.0: setting latency timer to 64 [ 24.892231] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 24.897684] mei 0000:00:16.0: wd: failed to find the client [ 24.969045] acer_wmi: Acer Laptop ACPI-WMI Extras [ 24.969062] acer_wmi: Function bitmap for Communication Button: 0x801 [ 24.969067] acer_wmi: Brightness must be controlled by acpi video driver [ 24.986585] input: Acer WMI hotkeys as /devices/virtual/input/input8 [ 24.986871] input: Acer BMA150 accelerometer as /devices/virtual/input/input9 [ 25.339235] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 25.339243] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.339246] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 25.339250] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.339251] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 25.349790] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd [ 25.437908] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e046 [ 25.437918] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 25.437924] usb 1-1.1: Product: BCM20702A0 [ 25.437929] usb 1-1.1: Manufacturer: Broadcom Corp [ 25.437933] usb 1-1.1: SerialNumber: 08EDB9F44316 [ 25.747638] Adding 4192252k swap on /dev/mapper/luks-4ef0311f-7bfb-4b4c-a478-38a5eb627ec4. Priority:0 extents:1 across:4192252k [ 26.148958] iTCO_vendor_support: vendor-support=0 [ 26.181617] wl: module license 'MIXED/Proprietary' taints kernel. [ 26.181621] Disabling lock debugging due to kernel taint [ 26.341729] lib80211_crypt: registered algorithm 'TKIP' [ 26.342022] eth0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 5.100.82.112 [ 26.694349] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 26.694404] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 26.694549] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.753431] Linux media interface: v0.10 [ 26.767358] Linux video capture interface: v2.00 [ 26.916236] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 27.649721] hda_codec: ALC269VB: SKU not ready 0x598301f0 [ 27.650076] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 27.650078] ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.650080] ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 27.650082] ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0 [ 27.650083] ALSA sound/pci/hda/hda_auto_parser.c:335 inputs: [ 27.650085] ALSA sound/pci/hda/hda_auto_parser.c:339 Mic=0x18 [ 27.650087] ALSA sound/pci/hda/hda_auto_parser.c:339 Internal Mic=0x1b [ 27.651254] ALSA sound/pci/hda/patch_realtek.c:1336 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d [ 27.651256] ALSA sound/pci/hda/patch_realtek.c:1419 realtek: Enable default setup for auto mode as fallback [ 27.892354] uvcvideo: Found UVC 1.00 device HD Webcam (1bcf:2c18) [ 27.900918] input: HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10 [ 27.900992] usbcore: registered new interface driver uvcvideo [ 27.900994] USB Video Class driver (1.1.1) [ 27.940995] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 27.941071] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 27.941124] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 32.849884] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 39.509026] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 39.519990] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 40.644050] vboxdrv: Found 4 processor cores. [ 40.644193] vboxdrv: fAsync=0 offMin=0x1ba offMax=0x11ba [ 40.644246] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 40.644247] vboxdrv: Successfully loaded version 4.1.22 (interface 0x00190000). [ 40.787228] tg3 0000:02:00.0: irq 45 for MSI/MSI-X [ 40.787239] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 40.787247] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 40.787254] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 40.787261] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 40.949960] Bluetooth: Core ver 2.16 [ 40.949979] NET: Registered protocol family 31 [ 40.949981] Bluetooth: HCI device and connection manager initialized [ 40.949983] Bluetooth: HCI socket layer initialized [ 40.949985] Bluetooth: L2CAP socket layer initialized [ 40.949990] Bluetooth: SCO socket layer initialized [ 40.983230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.983234] Bluetooth: BNEP filters: protocol multicast [ 41.350326] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 42.445177] vboxpci: IOMMU not found (not registered) [ 59.368941] fuse init (API version 7.20) [ 65.832225] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 66.072802] ISOFS: changing to secondary root [ 73.110947] RPC: Registered named UNIX socket transport module. [ 73.110951] RPC: Registered udp transport module. [ 73.110952] RPC: Registered tcp transport module. [ 73.110954] RPC: Registered tcp NFSv4.1 backchannel transport module. Created attachment 1011 [details]
/var/log/messages after login
I added the /var/log/messages file as attachment. Cleaned it not to contain any private data. Changing the API and rebuilding the kmod-wl did not work. I removed the old kmods before rebuild and reboot. -Br, tskoone (In reply to comment #9) > I added the /var/log/messages file as attachment. Cleaned it not to contain any > private data. > > Changing the API and rebuilding the kmod-wl did not work. I removed the old > kmods before rebuild and reboot. > > -Br, tskoone Thank you for providing all this. After a quick look at all this material, nothing seems to be broken with your wireless device. In the /var/log/messages file I can see that your eth0 interface is in order one time your BCM4359 wireless device (aka BCM43228), and another time your BCM57785 Ethernet wired device. Maybe the Ethernet driver tg3 is causing your wireless device to be wiped out. Maybe you should force the wireless device name at boot time by adding in your /etc/udev/rules.d/70-persistent-net.rules file the following lines (one beginning with a sharp and one beginning with SUBSYSTEM - be careful of broken lines in this bugzilla): # PCI device 0x14e4:0x4359 (wl) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="XX:XX:XX:XX:XX:XX", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="wlanN" Take care to modify XX:XX:XX:XX:XX:XX with your wireless device MAC address and wlanN with the wireless device name you wish (eg wlan0 or wlan1 etc. ). Probably others settings should be modified according to the choice you will make (NetworkManager, proxy settings, etc. ). As I can see a wlan0 in the files you provided (seems to be an usb wireless device), you should remove it in order to see if changes are Ok or not. After this you should see all your network devices when typing in a root console: ifconfig -a If your wireless device isn't listed by the above command, you should then try to switch to the WEXT API and try again to see if it appears in the list. Feel free to provide any information you think necessary about this issue. Cordially, -- NVieville Hello, Any news about this issue? Did you get it working? Cordially, -- NVieville RPMFusion is no longer releasing updates for this version of Fedora. This bug will be set to RESOLVED:EXPIRED next week to reflect this. If the problem persists after upgrading to the latest version of Fedora, please update the version field of this bug (and re-open it if it has been closed). Setting to RESOLVED:EXPIRED since RPMFusion is no longer releasing updates for this version of Fedora. |